Wings Photo necklace- Sublimation Blank

Available in 2 different finishes.

Sublimation transfer is for heat transfer use. Each item includes sublimation center, adhesive, and chain.

Supplies needed:
- sublimatable substrate (key chain insert)
- sublimation transfer
- teflon or scratch paper
- heat tape or re-positionable spray
- soft paper towel (optional but recommended)

Heat press settings:
- temperature - 400 degrees F
- dwell time - 45-60 seconds
- pressure - light to medium

Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the heat press brand and model ink and paper
and atmospheric conditions.