White Sublimatable UVSub Aluminum License Plate with 4 Holes

12" x 6" x .025" White Sublimatable UVSub Aluminum License Plate with 4 Holes

License plate frames are the perfect complement to cars, trucks, and motorcycles. Are available in a variety of frame style options our license plate frames are a creative way to personalize your ride!

Holes are 1 7/8" in from the side and 1/2" in from the top/bottom.
There is 6 1/4" between the holes lengthwise.
There is 4 1/2" between the holes from top to bottom.

Heat press settings:
- temperature - 390 degrees F
- dwell time - 35-45 seconds
- pressure - very light

Steps:
1. Place the metal face down onto the transfer.
2. Tape two ends of the metal to the transfer using the heat tape.
3. Place the transfer and metal in the press onto the paper towel (substrate
on top of transfer)
4. Place the teflon sheet or scratch paper over the transfer and metal.
5. Press the items using the settings listed above.
6. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
7. Tear the transfer in half opposite of the taped ends.