Sublimation Glass Pint Tumbler with plastic lid| 20 oz | CLEAR OR FROSTED| Includes Sublimation Bottle Opener

This listing is for 1 individual clear or frosted glass beer can with plastic lid, sublimation bottle opener and straw included.

Dimensions of cup are down from 11 1/4 in circumference by 6 1/2 inches tall.

Mug heat press settings:
- temperature - 400 degrees F
- dwell time - 4:00 - 7:00 minutes (see the press manufacturer for recommended
dwell time for glass mug)
- pressure - light

• Preheat Convection Oven to 375°F.
• Tape transfer to bottle with heat tape.
• Using shrink wrap sleeve:
o Place glass with transfer attached inside the shrink sleeve.
o Use a heat gun to shrink the sleeve to the glass.

For best results, heat the shrink sleeve on the opposite side of the transfer paper first. Once shrunk, heat the rest of the shrink sleeve against the transfer paper. This ensures a tight, flat shrink sleeve fitting against the transfer paper.

Place wrapped glass in the convection oven to heat for 10-12 min.
o After heating, removed glass from oven and let cool. DO NOT submerge glass into water to cool.
• After cooling, remove wrap. Discard shrink wrap (if used) and transfer paper.