White Sublimatable UVSub Aluminum Motorcycle License Plate
White Sublimatable UVSub Aluminum Motorcycle License Plate
7" x 4" x .025" White Sublimatable UVSub Aluminum Motorcycle License Plate
Heat press settings:
- temperature - 390 degrees F
- dwell time - 35-45 seconds
- pressure - very light
Steps:
1. Place the metal face down onto the transfer.
2. Tape two ends of the metal to the transfer using the heat tape.
3. Place the transfer and metal in the press onto the paper towel (substrate
on top of transfer)
4. Place the teflon sheet or scratch paper over the transfer and metal.
5. Press the items using the settings listed above.
6. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
7. Tear the transfer in half opposite of the taped ends.
Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the heat press brand and model ink and paper
and atmospheric conditions.