Circle Shape Slate Blank Matte Sublimation Stone

5.9" Circle Matte Finish SubliStone. Made of actual stone with chipped edges. Edges and back are dark charcoal grey. The SubliStone comes with two black plastic stands to display on any desk or mantle. Packaged in bubble wrap inside a corrugated cardboard box. Memorialize a loved one or use your favorite inspirational quote.

SUBLISTONE SUBLIMATION (matte and glossy finish)

There are 2 methods of sublimating this product. Scroll for all methods.

METHOD 1

Heat press settings:
- temperature - 400 degrees F
- dwell time - 5:00 to 5:30
- pressure - light to medium

- The recommended settings above may need adjustments for best results.
Settings will vary depending on the heat press brand and model ink and paper
and atmospheric conditions.
- Clamshell type presses may not be ideal for sublimating items more than 1/4
inch thick. Presses that can deliver pressure from directly above the
substrate are recommended.
- To add color to the rough edges of the stone increase the bleed edge by 3/4
of an inch and wrap the transfer around the substrate on all 4 sides. Secure
with heat tape.
- Make sure that the sublistones are at room temperature before sublimating.
The temperature of the stone prior to sublimating will greatly influence the
dwell time necessary for best results.

Layer the press from the bottom pad to the top heat platen as follows:
1. teflon sheet or scratch paper
2. green heat conductive pad
3. transfer - face up
4. sublistone - face down
5. teflon sheet or scratch paper

Steps:
1. Attach transfer to substrate with heat tape wrapping all 4 edges around
the substrate.
2. Place the substrate and transfer onto the heat conductive pad (transfer on
under the substrate).
3. Place the teflon sheet or scratch paper over all the materials.
4. Press the items using the setting listed above.
5. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.

Tips:
- If the image of the final product appears light increase the dwell time
slightly (15-30 seconds).
- If the image on the final product appears blurred or yellowed reduce the
dwell time slightly (15-30 seconds).
- If the surface of the stone appears to have a scratchy finish after
sublimating or the paper sticks to the surface reduce the pressure.

METHOD 2

Supplies needed:
- sublimatable substrate (Sublistone)
- sublimation transfer
- teflon or scratch paper
- heat conductive pad
- heat tape

Heat press settings:
- temperature - 360 degrees F
- dwell time - 8:00 to 8:30
- pressure - light to medium

- The recommended settings above may need adjustments for best results.
Settings will vary depending on the heat press brand and model ink and paper
and atmospheric conditions.
- Clamshell type presses may not be ideal for sublimating items more than 1/4
inch thick. Presses that can deliver pressure from directly above the
substrate are recommended.
- To add color to the rough edges of the stone increase the bleed edge by 3/4
of an inch and wrap the transfer around the substrate on all 4 sides. Secure
with heat tape.
- Make sure that the sublistones are at room temperature before sublimating.
The temperature of the stone prior to sublimating will greatly influence the
dwell time necessary for best results.


Layer the press from the bottom pad to the top heat platen as follows:
1. teflon sheet or scratch paper
2. sublistone - face up
3. transfer - face down
4. green heat conductive pad

Steps:
1. Attach transfer to substrate with heat tape wrapping all 4 edges around
the substrate.
2. Place the substrate and transfer into the press (transfer on top of the
substrate).
3. Place the heat conductive pad on top of the transfer.
4. Press the items using the setting listed above.
5. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.